Home » Support & Service Center
Support & Service Center
Enter a part number or type a question and find all the related
FAQs of the product.

img img
 
FAQ Topic
 
Workstation & Outlets
Patch Panels & Cross Connect
Cords & Cable Assemblies
Racks & Cable Management
Fiber Optic System
Bulk Cables
Raceway
Tools & Connectors
Residential
Pre-Terminated Assemblies
 
img   img
 
Question Title
What happens when a 6P plug is inserted into a 8P jack?
Will ICCs Category 5e system run 155 Mbps ATM?
What is the difference between RG-59 and RG-6 cables and can they be used on ICC F-Type feedthrough modules IC107B5Fxx and IC107B5Gxx?
What are the minimum numbers of connectors that should be used in individual work area?
What is the purpose of the ICC’s IC625DS and IC635DS RJ31X surface mount jack?
Why does the IC1078E5xx Category 5e EZ Module show open when stranded cable is used?
What is ion loss?
What will happen if I mix and match different manufacturers hardware together?
What is crosstalk?
What is return loss?
What are the differences between Category 3 4 and 5 ratings?
What does RJ mean?
Is a bracket needed to install the Universal Modular Faceplates (IC108UFPxx and IC108UF4xx)?
When is TIA expected to release the standard for Category 6?
How is Pin 1 identified on a jack?
If a faceplate hole has been cut too large in modular furniture does ICC offer a solution?
Are all ICCs 8P8C Modular Connectors Category 5e rated?
What are the physical differences between 50 Ohm and 75 Ohm BNC connectors?
Which of the two following terms support speed and which is correctly used for bandwidth MHz and Mbps?
Can an RJ-11 plug be used in an RJ-45 jack?
Can ICCs CAT 5e modules IC1078E5xx and IC1078F5xx run up to 350MHz?
Do ICCs EZ Modules (CAT 6 CAT 5e and Voice) require a punch down tool?
Why are ICC Category 5e modules wired differently from Category 3 modules?
Does ICC supply mounting hardware with faceplates?
Does ICC manufacture a low profile mounting box that is shallower than the 1.89 inches deep NEMA box?
Can you recommend a field tester for wiring set ups?
What is EMI and how can you guard against it?
What are the differences between Category 5 and Category 5e ratings?
Can ICCs 8P8C modular plug be used in the CAT 5 CAT 5e or CAT 6 applications?
Does ICC offer any 23 inch racks or rack mounted products?
Displaying 1 to 30 (of 194 faqs) Result Pages:  1  2  3  4  5  6  7  [Next >>] 
BICSI member Telecommunications Industry Association   ISO 9001:2008 Registered