FAQ Search Results
What Happens When A 6P Plug Is Inserted Into A 8P Jack?
It Is Recognized Throughout The Industry That It Is A Common Practice For Installers And End User To Insert 6P Plugs Into 8P Jacks. Some System Testers And Other Related Telecom Equipment Are Designed ,...
Will ICCs Category 5e System Run 155 Mbps ATM?
Yes ICC Category 5e Products Will Handle 155 Mbps ATM.
What Is The Difference Between RG-59 And RG-6 Cables And Can They Be Used On ICC F-Type Feedthrough Modules IC107B5Fxx And IC107B5Gxx?
The Difference Has To Do With The Center Pins Outer Diameters And RF Loss. Both Utilize 75 Ohm Cable Found In Video Applications Like Cable Television. The Center Conductors Are Of Different Gauges Th ,...
What Are The Minimum Numbers Of Connectors That Should Be Used In Individual Work Area?

A Minimum Of Two Telecommunications Outlets/connectors Should Be Provided For Each Individual Work Areas. One Telecommunications Outlet/connector May Be Associated With Voice, And Th ,...
What Is The Purpose Of The ICC’s IC625DS And IC635DS RJ31X Surface Mount Jack?
The RJ31X Surface Mounting Jack Is Used With Security Systems Or Similar Applications That Feature A Remote Monitoring Option. The RJ31X Incorporates A Shorting Bar So That When The Alarm Reporting De ,...
Related Document Download
Data sheets
NO download document Is Available 
Spec Sheet
NO download document Is Available 
Installation Instructions
NO download document Is Available 
 
Enter Zip Code
Gain Structured Cabling Solution product knowledge and find valuable resource.
 
Support Center Search:                  
Search Product:
Search Using:
Search From:
Search Type:
Modified:
   
FAQ Search Results Page 1 of 12 / 180 matches
What Happens When A 6P Plug Is Inserted Into A 8P Jack?
It Is Recognized Throughout The Industry That It Is A Common Practice For Installers And End User To Insert 6P Plugs Into 8P Jacks. Some System Testers And Other Related Telecom Equipment Are Designed With A 6P Plug Connector. When A 6P Plug Is Inserted I
Will ICCs Category 5e System Run 155 Mbps ATM?
Yes ICC Category 5e Products Will Handle 155 Mbps ATM.
What Is The Difference Between RG-59 And RG-6 Cables And Can They Be Used On ICC F-Type Feedthrough Modules IC107B5Fxx And IC107B5Gxx?
The Difference Has To Do With The Center Pins Outer Diameters And RF Loss. Both Utilize 75 Ohm Cable Found In Video Applications Like Cable Television. The Center Conductors Are Of Different Gauges The RG-59 Center Conductor Is 20-22 AWG And RG-6 Is 1
What Are The Minimum Numbers Of Connectors That Should Be Used In Individual Work Area?

A Minimum Of Two Telecommunications Outlets/connectors Should Be Provided For Each Individual Work Areas. One Telecommunications Outlet/connector May Be Associated With Voice, And The Other With Data. The Two Telecommunications Outlets/connectors Need To Be Configured As F
What Is The Purpose Of The ICC’s IC625DS And IC635DS RJ31X Surface Mount Jack?
The RJ31X Surface Mounting Jack Is Used With Security Systems Or Similar Applications That Feature A Remote Monitoring Option. The RJ31X Incorporates A Shorting Bar So That When The Alarm Reporting Device Is Not Plugged In, The Phone Line Continuity Is Still Maintained. This Allows An Alarm Reportin
Why Does The IC1078E5xx Category 5e EZ Module Show Open When Stranded Cable Is Used?
The IC1078E5xx Category 5e EZ Module Is Rated At 22-24 AWG Solid Wire Only. Solid Core Connectors Are Designed So That The Blade In The Pin Connection Is Split Into Two Tines, Which Firmly Grasps The Solid Wire. Stranded Wire Connectors Are Designed So That The Blade Pierces The Strand. If The Wrong
What Is Ion Loss?
More Commonly Referred To As Attenuation Insertion Loss Is The Loss Of Signal Power Between Two Points. Items That Lead To Signal Loss Are Excessive Cable Length Temperature Humidity And Excess Return Loss.
What Will Happen If I Mix And Match Different Manufacturers Hardware Together?
If The Components Are Category 6 Compliant Then You Will Be Assured Of Category 6 Performance.
What Is Crosstalk?
Crosstalk Is The Unwanted Introduction Of Signals From One Channel Or Pair To Another.
What Is Return Loss?
Return Loss Is The Ratio Of Signal Power Transmitted Into A System To The Power Reflected. An Echo Best Describe Return Loss. Changes In Or Mismatched Impedance Causes Signal Reflection.
What Are The Differences Between Category 3 4 And 5 Ratings?

1. Category 3 Is Specified Up To 16 MHz And Is Typically Used For Voice And Data Transmission Rates Up To And Including 10 Mbps.

2. Category 4 Is Specified Up To 20 MHz And Is Typically Used For Voice And Data Transmission Rates Up To And Including 16

What Does RJ Mean?
RJ Stands For Registered Jacks. These Are Telephone And Data Jacks That Are Registered With The FCC And Are Identified As RJ-11 RJ-45 Etc.
Is A Bracket Needed To Install The Universal Modular Faceplates (IC108UFPxx And IC108UF4xx)?
No. The Base Has Movable Latching Tabs That Slide To Grab The Baseboard Wall.
When Is TIA Expected To Release The Standard For Category 6?
TIA Released The Standard For Category 6 In 2001.
How Is Pin 1 Identified On A Jack?
When Looking Into The Jack Cavity With The Jack In The Tab Down Position Pin 1 Would Be The First From The Left.
1 2 3 4 5 6 7 8 9 10 11 12
Support Links  

You will put the support links here.
BICSI member Telecommunications Industry Association CEDIA Certification ISO 9001:2000 Registered