CAT 6c HD MODULAR CONNECTOR
CAT 6c HD MODULAR CONNECTOR

MODULE, CAT 6c, HD
Available Options:
Color:
Part No.: IC1078F6
Spec Sheet
  • Overview
  • Feature
  • Specification
  • Related Items
  • Support Center

CAT 6 High Density (HD) Category 6 modular jacks, RJ-45 keystone jacks, is 8-position 8-conductor (8P8C) is engineered to provide superior performance and reliability, supporting Gigabit Ethernet applications and beyond. The advanced printed circuit board design is tuned to provide optimum signal quality with maximum headroom, allowing it to exceed TIA/EIA Category 6 performance standards. It offers superior signal quality and noise reduction due to its enhanced Near-End and Far-End Crosstalk cancellation and minimum return losses. The Category 6 HD design offers a smaller rear footprint maximizing space in confined work areas.

  • CAT 6 rated connectors provide excellent performance for data networks requiring maximum speed and bandwidth
  • PCB technology provides maximum performance and superior signal quality
  • Enhanced crosstalk cancellation reduces return loss and improves performance by rejecting noise and unwanted signals
  • Exceeds ANSI/TIA/EIA-568-B.2-1 Category 6 connecting hardware requirements
  • Designed with rear split back 110 IDC reducing termination time
  • Terminate with 110 punch down tool ICACSPDT00
  • Reduced rear footprint allows for greater connectivity density and provides for more port configurations in a smaller area
  • Includes an integrated TIA-568A/B color wiring diagram
  • Backwards compatible to all lower rated category components
  • Compatible with all ICC configurable faceplates, inserts, surface mount boxes, and blank patch panels
  • Compatible with all ICC furniture faceplates, Elite bezels, and Elite surface mount boxes
  • Used with Category 6 patch cords
  • Available in almond, black, blue, gray, green, ivory, orange, purple, red, white, and yellow
  • Installation instructions included
  • UL listed

1. CAT 6 Module:
A. Electrical:
Current rating: 1.5 amps
Insulation resistance: 500 mohms min.
Contact resistance: 20 mohms max.
DC resistance: 0.1 ohm max.
Transmission performance exceeds Category 6 connecting hardware requirements specified in TIA/EIA-568-B.2-1 when used with compatible horizontal cable
B. Mechanical:
Plug insertion life: 750 cycles min.
Plug and jack contact force: 100 grams min. using FCC approved plug
Plug retention force: 30 lbs min.
Temperature: -40o to 150o F (-40o to 68o C)
C. Physicals:
Housing: ABS, UL 94V-0
Jack wiring: 50 micro inches of gold over 100 inches of nickel
Connector: insulation displacement connector (IDC); accepts 23~24 AWG solid wire
D: Colors: XX: AL-Almond, BK-Black, BL, Blue, GN-Green, GY-Gray, IV-Ivory, OR-Orange, PR-Purple, RD-Red, WH-White, YL-Yellow

2. Termination cap:
A. Material: PC, UL 94V-0
B.Color: Clear

FACEPLATE, FLAT, 1-GANG, 1-PORT,
FACEPLATE, FLAT, 1-GANG, 1-PORT,		 TOOL, 110 & 66 PUNCH DOWN, SINGLE BLADE
TOOL, 110 & 66 PUNCH DOWN, SINGLE BLADE		 FACEPLATE BOTTOM ANGLED 1-GANG 4-PORT
FACEPLATE BOTTOM ANGLED 1-GANG 4-PORT
FACEPLATE BOTTOM ANGLED 1-GANG 2-PORT
FACEPLATE BOTTOM ANGLED 1-GANG 2-PORT

Type Your Question
 
  Related FAQs
What happens when a 6P plug is inserted into a 8P jack?
  Product Support
Spec Sheets
NO download document is Available
Installation Sheets
NO download document is Available
Data Sheets
NO download document is Available

 
 
Locate a Distributor
Email to a Friend
Add to My Folder
 
Enter Zip Code
Gain Structured Cabling Solution product knowledge and find valuable resource.
 
 
BICSI member Telecommunications Industry Association CEDIA Certification ISO 9001:2000 Registered