Elite Installer Benefits

Take advantage of our Elite Installer Program and receive exclusive warranties, offers, discounts, and so much more!

View Benefits Here or Sign Up!

Subscribe to newsletters

CAT 6A 2U 48-Ports, 110-Type UTP, 10G Patch Panel


Download Product Documents Below:




ICC’s Category 6A 48-Port 110-Type 10G Patch Panel is component compliant to ANSI/TIA Category 6A connecting hardware requirements. The vertical 110-Type IDC on the rear is designed to provide optimum permanent and channel link performance and reduces potential Alien Crosstalk (ANXT).  The jacks are grouped in six-port modules for quick administration and labeling. All of the modular contacts are 50µ” gold plated to protect from corrosion. The high density design occupies 2 rack mount space (RMS) and measures 19” width x 1.75” height.


  • Vertical 110-Type IDC connections reduces potential Alien Crosstalk (ANXT)
  • Enhanced crosstalk cancellation and reduced return loss for high bandwidth network requirements
  • Exceeds ANSI/TIA-568 CAT 6A (10G) connecting hardware component rating requirements
  • 110-Type IDC termination helps reduce installation time and improve wire retention
  • 50µ” gold plating on all modular contacts to protect from corrosion
  • Mounts on industry standard 19” wide racks or equipment
  • 2 rack mount spaces (RMS)
  • T568A or T568B wiring schemes
  • Meets TIA/EIA-568-C.2 Cat 6A connecting hardware requirements
  • UL Listed


1. Environmental conditions:

  • Temperature range
  • Storage: -40° to +70°C
  • Operational: -10° to +60°C
  • Relative humidity (operational): maximum noncondensing 93%

2. Electrical:

  • Electrical insulation resistance: 500MΩ min @ 100V DC
  • Dielectric withstanding voltage: 1000V DC or AC peak
  • Contact @ 60Hz for 1 minute
  • Spring wire contact resistance: 20MΩ max.
  • IDC contact resistance: 2.5MΩ max.

3. Mechanical:

  • Retention: 50N (11 lbs sq) or 60S±5S
  • Insertion/extractor: 750 cycles min.
  • IDC wire gauge: 22~24 AWG

4. Physical:

  • Housing: zinc alloy fully shielded
  • Marking: mold UL information
  • Spring wire: phosphor bronze alloy plated with 50µ”of gold over 70~100µ” of nickel
  • IDC: phosphor bronze alloy with 100µ” 100% Sn alloy
  • Size: 3.47” height x 19.00” width x 1.28” depth
Recently viewed products